XRGB3 Problem with N64

Discussion in 'Repair, Restoration, Conservation and Preservation' started by Jackhead, Jan 11, 2017.

  1. Jackhead

    Jackhead Moderator Staff Member

    Joined:
    Apr 3, 2008
    Messages:
    2,408
    Likes Received:
    424
    Hi,

    i have some problems with my XRGB3 and im not sure whats wrong.
    First at all i try my SFC jr with RGB Mod = picture perfect no issues at all
    Than i try my N64 with etim rgb board = no picture, signal skips between 15/45KHz (tryed 2 rgb cables for GC/N64)
    After that i try to use the N64 with my RGB cable from the SNES = no picture.
    Now i got a FC AV = no picture with AV cable

    Any of this consoles work on my second TV with scart input. So output and cable are fine.
    I not really understand why the xrg3 have problems with this two consoles...
    DC, MCD, MD2, PS1, Saturn work also fine with rgb or av.
    The XRGB3 have the latest firmware installed, i run basic setting with B0.
    Output from the XRGB3 i use a DVI cable to HDMI. B1 dont work VGA.

    Any ideas?

    regards
    Chris
     
    Last edited: Jan 11, 2017
  2. skyway1985

    skyway1985 Enthusiastic Member

    Joined:
    Jan 23, 2014
    Messages:
    542
    Likes Received:
    130
    what type of sync is the 64 using? also AV fami through composite on scaler should just work. thats odd. i know the one i had hated MD composite.
     
  3. Jackhead

    Jackhead Moderator Staff Member

    Joined:
    Apr 3, 2008
    Messages:
    2,408
    Likes Received:
    424
    OK av fami work now i used a scart adapter before...

    For the N64
    I had a bridge to Luma, V--L. On the N64 board.
     
  4. skyway1985

    skyway1985 Enthusiastic Member

    Joined:
    Jan 23, 2014
    Messages:
    542
    Likes Received:
    130
    try changing sync source from luma to another, maybe even try composite.
     
  5. Jackhead

    Jackhead Moderator Staff Member

    Joined:
    Apr 3, 2008
    Messages:
    2,408
    Likes Received:
    424
    tryed this before luma, composite and chroma but nothing on the xrgb3
     
    Last edited: Jan 11, 2017
  6. AtomizerZero

    AtomizerZero Enthusiastic Member

    Joined:
    Aug 13, 2013
    Messages:
    588
    Likes Received:
    112
    Doesn't the xrgb3 need csync from N64?
     
  7. Jackhead

    Jackhead Moderator Staff Member

    Joined:
    Apr 3, 2008
    Messages:
    2,408
    Likes Received:
    424
    need ultra hdmi mod :(
     

Share This Page