GCVideo Lite

Discussion in 'Modding and Hacking - Consoles and Electronics' started by Jord4n313, Mar 6, 2018.

  1. Jord4n313

    Jord4n313 Member

    Jun 27, 2017
    Likes Received:
    Hi all, does anyone know if there has been a successful mod where the GCVideo lite board was installed with the RGB outputs soldered to the Analog AV port so that the classic SNES/N64 style scart cable can be used? I would assume it is doable since the NTSC Gamecube does not output RGB so those pins shouldn’t be connected to anything right? However, one diagram of the Analog AV pinout states that the csync pin may be still connected to either csync or 12V on the NTSC gamecube, in that case just cutting the trace and wiring the gcvideo lite’s csync should be sufficient right?

    Does anyone know if there is any place to buy a complete, pre-programmed GCVideo Lite (analog) board?

Share This Page