cheap enclosure for Everdrive TG

Discussion in 'Turbo Everdrive' started by mdmx, Feb 22, 2013.

  1. mdmx

    mdmx Familiar Face

    Joined:
    Nov 3, 2005
    Messages:
    1,308
    Likes Received:
    30
    I have found a cheap enclosure for my Everdrive TG. I use an enclosure from an old PCMCIA cart. The Everdrive TG does fit in fine. I've just added a small piece of felt to stabilize the cart when being carried.

    [​IMG]

    [​IMG]
     
    wilykat likes this.
  2. wilykat

    wilykat Site Supporter 2013

    Joined:
    Mar 25, 2012
    Messages:
    991
    Likes Received:
    45
    Nice find!
     
  3. YAGRS

    YAGRS Rising Member

    Joined:
    Aug 21, 2010
    Messages:
    72
    Likes Received:
    0
    I actually bought one of these for my Turbo Everdrive, but it doesn't work with BuffaloWing's 3-D printed cover. I ended up using it for my Arcade Card Pro, since I didn't have a case for it. Instead, I converted an old Keith Courage case. The cover of the case bows out a bit, but it does close.
     
  4. BuffaloWing

    BuffaloWing Robust Member

    Joined:
    Jul 31, 2012
    Messages:
    277
    Likes Received:
    27
    YAGRS, How much bigger is my 3D cover? Can you tell me how big the opening is on the case in metric (mm)? I made a low profile version for myself and I might pick this up if it fit.
     
  5. YAGRS

    YAGRS Rising Member

    Joined:
    Aug 21, 2010
    Messages:
    72
    Likes Received:
    0
    I just measured, and it looks like it will fit if it is 5 mm thick or less. My Turbo Everdrive with the cover on it is just under 8 mm. If my Arcade Card Pro were much thicker, it wouldn't fit.

    Hope that helps!
     
  6. alexkidd401

    alexkidd401 Member

    Joined:
    Oct 18, 2013
    Messages:
    11
    Likes Received:
    0
    Pretty crafty. I have to look into this. Thanks!
     

Share This Page