Action: Bought From
Time: July 2011
Item: JTAG Falcon
Feedback: Awesome guy to deal with, shipped very fast, packaged well, item as described....
Action: PSOne mod, PS2 service
Comments: Ray was a perfect gent, and superfast to do the work for me. Very polite in comms, could not have asked...
You need to measure it on the PCB while it's under load, it's no good measuring at the connector, the further from the connector the better
I'm getting around it just using GSM, which is fine, I've lucked upon getting Ibara and ESPGaluda running in 240p so I've gained more than I've...
Yeah I did try already on fresh memory card, even without one in it's just the same.
Thanks again for the help that's brought me this far. :)
I tried lenschanger, it wouldn't even load, i've no idea why.
It seems that when I force component out it defaults to VGA, which is probably why...
OK, I found it, and have managed to factory reset the unit.
RGB Scart is back to normal, but component is still not working properly. If I select...
Thanks for the help.
I can't find Boot Manager.elf, could you point me in the right direction?
GSM.elf allows me to select any video mode, but...
Having an annoying problem with my PS2 fat, can anyone help...?
All of a sudden component video out no longer works when selected in 'System...
Action: Purchased From
Item: Broken AVR Minimus, as advertised
Comments: Posted the following day, arrived a day later, super smooth...
Ideally you should use an ArcadeVGA as well, you could use soft15khz, but you'll need to boot the PC without the monitor hooked up
It's not uncommon to have to adjust rgb between pcbs too.
Horizontal Hold 15khz
This is the one you want.
Should be H Snyc and V Sync somewhere else on the board too
No worries, let me know how it goes!
These are your geometry pots (highlighted in pink)
Wipe some of the dust off so you can read what's printed on the silkscreen in front...
If you can take some pics of it even better
What's the model number of the chassis?
Should be a sticker on it, or possibly on the silkscreen of the chassis
They are on the monitor chassis (not the remote board under the panel) It's the large PCB attached to the monitor frame, not to be confused with...
They are on the back of the chassis... I think, from memory
Separate names with a comma.