Pikkon's Recent Activity

  1. Pikkon replied to the thread Snes Component Mod.

    If you never connected ground then that's why the mod never worked in the first place. If you want I can take some voltage readings and...

    Feb 16, 2019 at 3:00 AM
  2. Pikkon replied to the thread Snes Component Mod.

    I can say if you get the component mod working it should be all in color just like rgb.

    Feb 16, 2019 at 12:27 AM
  3. Pikkon replied to the thread Snes Component Mod.

    On the top. http://wolfsoft.de/wordpress/?p=2369

    Feb 16, 2019 at 12:14 AM
  4. Pikkon replied to the thread Snes Component Mod.

    Guess you didn't find any broken traces on the s-enc and as for the snes it has internal traces as well. You could replace the caps...

    Feb 15, 2019 at 11:55 PM
  5. Pikkon replied to the thread Snes Component Mod.

    Don't think there's a schematic for any pal snes's available,only for the first JPN/US systems that I'm aware of. Just trace out the...

    Feb 15, 2019 at 10:43 AM
  6. Pikkon replied to the thread Snes Component Mod.

    What I would do is use your meter and see if there's any broken traces on the s-enc.

    Feb 15, 2019 at 9:23 AM
  7. Pikkon replied to the thread Snes Component Mod.

    Guess you don't have a crt with component,that would be the best test.

    Feb 15, 2019 at 5:40 AM
  8. Pikkon replied to the thread Snes Component Mod.

    As for pin 7 and I just use this as it's more convenient. [IMG]

    Feb 15, 2019 at 4:49 AM
  9. Pikkon replied to the thread Snes Component Mod.

    I opened my snes and I'm rocking the same SNSP-CPU-02 as you,even have the SuperCIC as well. I have 470uf caps on pins 1 and 24,think...

    Feb 15, 2019 at 12:24 AM
  10. Pikkon replied to the thread Snes Component Mod.

    First make sure you have no bridges on the s-enc and did you discharge the console before you did the mod?

    Feb 14, 2019 at 8:18 AM
  11. Pikkon replied to the thread Snes Component Mod.

    Do you have a ps2 with component cables? If so load up a ps1 game and see what outputs.

    Feb 14, 2019 at 4:14 AM
  12. Pikkon replied to the thread Snes Component Mod.

    Pin 1 and 24 I add a 100uf or 220uf cap,positive going to the s-enc and for green I grab it from the multiout,you can add a resister to...

    Feb 12, 2019 at 5:06 AM
  13. Pikkon replied to the thread Snes Component Mod.

    You can do a simple test,just plug in any old 240p console via composite into the green component port,if it shows up black and white...

    Feb 11, 2019 at 7:59 AM
  14. Pikkon replied to the thread Snes Component Mod.

    Think my pal snes might be the same model but I did the component mod on it and it turned out great. What kind of tv do you want to run...

    Feb 10, 2019