jet force gemini (e) (m4) [f1] help

Discussion in 'Everdrive 64' started by dellrichi, Aug 18, 2012.

  1. dellrichi

    dellrichi Newly Registered

    Joined:
    Aug 18, 2012
    Messages:
    4
    Likes Received:
    0
    hello
    as the title says I try to run the rom of Jet Force Gemini (E) (M4) [f1] of principle works, but when you get to play and finished the drive into the character to the screen stays black
    everdriver cartridge 64 v2 with pal cic
    firware: 2.24
    os: 1.28
    and also tested with the patch-jfgcp Dx if the bad rom patched but does mimo
    Jet Force Gemini rom (u) [b2] is perfect
    but I want to play in Spanish and I want to play Jet Force Gemini (E) (M4) [f1]
    Is there any solution?
    thanks
    perodonar my translation use a translator
     
  2. KRIKzz

    KRIKzz Well Known Member

    Joined:
    Apr 5, 2010
    Messages:
    1,672
    Likes Received:
    1
    Location:
    Ukraine
    probably you should force sram save type for hacked rom
     
  3. dellrichi

    dellrichi Newly Registered

    Joined:
    Aug 18, 2012
    Messages:
    4
    Likes Received:
    0
    's been trying to force sram with the cartridge pressing L or R and continues to operate as
    I imagine it will be by the patch or quue region is Jet Force Gemini (E) (M4) [f1], because the Jet Force Gemini (u) [b2] is perfect
    thanks for the reply and your help
    if not an OS upgrade prosima be solved?
    is the only game you encounter problems
    thanks
     
    Last edited: Aug 19, 2012
  4. dellrichi

    dellrichi Newly Registered

    Joined:
    Aug 18, 2012
    Messages:
    4
    Likes Received:
    0
    curiosity
    so if me and realized in Jet Force Gemini (E) (M4) [f1] if you record heading even if you can play the game
    I think we also lack a new patch as happened in Jet Force Gemini (u) that took first [b1] then drew [b2]
    are curious if not help
    I count my experience of the checks and tested
     
  5. Zoinkity

    Zoinkity Site Supporter 2015

    Joined:
    Feb 18, 2012
    Messages:
    460
    Likes Received:
    63
    Do you have an 8MB expansion pak in the console? If you do, you have to swap it with the original jumper pak.
    Jet Force Gemini is one of only maybe 2-3 games that will not work with the 8MB expansion. I've half a mind to just make a patch to circumvent the problem. You could probably get away just falsifying the detected rdram size with a GS code: F0000319 0040 Might work. Might not. Never tried, actually.

    It also required a save crack, reducing the FLASHram save into an SRAM one. If you need that, it should be backed up here:
    PAL http://n64.icequake.net/mirror/www.dextrose.com/files/n64/cracks/Dx-jfgcp.zip
    NTSC http://n64.icequake.net/mirror/www.dextrose.com/files/n64/cracks/Dx-jfgc.zip
    That causes its own problems though, since FLASH is a lot larger than SRAM. First file will be fine, but later ones won't save properly/at all.
     
  6. dellrichi

    dellrichi Newly Registered

    Joined:
    Aug 18, 2012
    Messages:
    4
    Likes Received:
    0
    forgive my delay in answering
    I tested with the patches as I put my mind and the same, and I feel the same with the PAL version
    and I finally gave up and bought me the original e, 1 or 2 games ballan not what I'm going to give much impotancia and Mallorie imensa that game if it goes
    thank you all for your help
     
    Last edited: Sep 16, 2012
  7. angrylion

    angrylion Active Member

    Joined:
    Mar 15, 2008
    Messages:
    31
    Likes Received:
    0
    Location:
    Moscow, Russia
    The problem is that the PAL patch wasn't well tested by LaC. It doesn't work with ED64 on a PAL N64 without Expansion Pak, regardless of save options, period. The game freezes when you land your spaceship into a giant basin. Even back then in 2000 there were no success reports about the PAL patch, as far as I remember. Also, notice how the release notes for the PAL patch were copied verbatim from the NTSC patch. Anyway, from the dextose.com archive:

     
    Last edited: Sep 17, 2012
  8. yourgamerman

    yourgamerman Member

    Joined:
    Apr 20, 2013
    Messages:
    12
    Likes Received:
    0
    Location:
    Mexicali, Baja California, Mexico
    Good news about Jet Force Gemini (E) (M4):

    NOW WORKS ON THE NEW 2.02 OS VERSION.

    No more freeze after Juno arrives the goolwood planet cutscene!

    that's true, trust me, check out my 2 photos Juno can Shoot and run on PAL (although the screen in my tv NTSC, is messed up, but i don't care), i tested in OS 2.02 Test6!

    Foto1542.jpg
    Foto1539.jpg



     

Share This Page