3 in 1 VGA Box Adapter With VGA Output S-Video Output and SD Card Reader

Has anyone tried these? Wondering if it is worth the money the 2 in 1 is a little cheaper

http://www.aliexpress.com/item/3-in...deo-Output-and-SD-Card-Reader/1465861485.html

 

Probably not has you could them yourself for considerably less

Or by buying separately there or elsewhere:
http://www.assemblergames.com/forums/showthread.php?42388-Dreamcast-VGA-box-amp-Scanline-generator
http://www.dc-sd.com

 

Wow, the 3-in-1 is ridiculously expensive given the only difference is an S-video jack. I would be tempted to get the 2-in-1 if it also had a scanline switch. One point in its favour is that the serial port connector appears to be a proper metal connector, unlike most of the SD adapters out there.

 

The older Dreamcast VGA boxes also have a SVideo option, though no SD Card slot.

 

The one I have is similar to the one CRTGAMER posted, quite happy with it

 

If you only want the vga cable, google "cabou dreamcast vga cable" he does great ones, with the connectors of your choice (male-female).
Else it's not really hard to build your own internal one.

 

Hope no one mind the bump but I have a VGA box similar to CRTGAMER. I get faint vertical lines with my box and was wondering if it could be fixed. I tried replacing caps and still have the vertical lines. I did not replace them all though. I decided to stop and ask. I found someone mentioned a similar box he has was ground properly but after take a close look at the solder joint on this box everything seems to be where it should be. Any suggestions?

This is what I am working with.