フレームマイスター Framemister Xrgb mini/ English firmware/free HDMI/ 37000 yen shipped

Discussion in 'The ASSEMblergames Marketplace' started by Yakumo, Feb 8, 2013.

Page 13 of 39
  1. kuze

    kuze Peppy Member

    Joined:
    Sep 28, 2011
    Messages:
    356
    Likes Received:
    4
    I've played my n64 through the framemeister, it doesn't really get much of an improvement using composite video (the framemeister is /really/ tailored towards rgb devices) and s-video didn't work but that might be because of the crappy third party video cable I got for free.

    I plan on modding my n64 for rgb soon whenever I get around to it, in fact I just got some rgb amps in for the project. I expect that it will look incredible over rgb, as every other device I've thrown at it has.
     
    kuze, Oct 4, 2013
    #241
  2. Yakumo

    Yakumo Moderator Staff Member

    Joined:
    Mar 14, 2004
    Messages:
    20,147
    Likes Received:
    338
    Oh man, I forgot to reply to this question. Anyway, I took a look at the menu settings on the Framemeister and I'm afraid it can't output audio via the phono ports. they are for input only. so the only way to get audio out of this unit is via the HDMI.
     
    Yakumo, Oct 6, 2013
    #242
  3. Yakumo

    Yakumo Moderator Staff Member

    Joined:
    Mar 14, 2004
    Messages:
    20,147
    Likes Received:
    338
    All new bulk buy offer added.
    Buy 8 Framemeister units and get one FREE!!
     
    Yakumo, Oct 6, 2013
    #243
  4. Shane McRetro

    Shane McRetro Blast Processed Since 199X. Site Patron.

    Joined:
    Mar 11, 2012
    Messages:
    1,891
    Likes Received:
    107
    I wish I needed that many Framemeisters, it would be a great excuse to have such good service again :)
    Mine is still going strong and I've been using it with the old PlayStations for the PSIO project - looks good! Darned good! :D

    Edit: Also good to see they pushed 1.08 out to the masses!
     
    Last edited: Oct 6, 2013
    Shane McRetro, Oct 6, 2013
    #244
  5. Yakumo

    Yakumo Moderator Staff Member

    Joined:
    Mar 14, 2004
    Messages:
    20,147
    Likes Received:
    338
    My own personal Framemeister is still runing 1.7 firmware. I really should update it.
     
    Last edited: Oct 6, 2013
    Yakumo, Oct 6, 2013
    #245
  6. sabre470

    sabre470 Site Supporter 2011, 2012, 2013, 2014 & 2015

    Joined:
    Mar 15, 2004
    Messages:
    1,462
    Likes Received:
    11
    That's ok mate ;) For D Terminal, Composite and S-Video, I can route the audio via RCA to my speakers but for Scart, I need to check if there is an adapter that can take the audio out. I have a Joytech device to connects everything together (yeah they're a bit crap) maybe I can get audio out that way and get some Framemeister goodness. Otherwise I'm back to XRGB3 or the SLG in a box, I saw a guy using it the same monitor as me with good result but I know the scaler in there isn't the best thing out there :(
     
    sabre470, Oct 6, 2013
    #246
  7. Shane McRetro

    Shane McRetro Blast Processed Since 199X. Site Patron.

    Joined:
    Mar 11, 2012
    Messages:
    1,891
    Likes Received:
    107
    Hahaha, no doubt buried under the masses of new Framemeisters you have :) Not a bad thing :D
     
    Shane McRetro, Oct 6, 2013
    #247
  8. sabre470

    sabre470 Site Supporter 2011, 2012, 2013, 2014 & 2015

    Joined:
    Mar 15, 2004
    Messages:
    1,462
    Likes Received:
    11
    One for each of the systems he has?
     
    sabre470, Oct 6, 2013
    #248
  9. Yakumo

    Yakumo Moderator Staff Member

    Joined:
    Mar 14, 2004
    Messages:
    20,147
    Likes Received:
    338
    Hehe, all the new Framemeisters are in a nice dry place while my own is sitting under the TV surrounded by RGB cables :)
     
    Last edited: Oct 6, 2013
    Yakumo, Oct 6, 2013
    #249
  10. Coligion

    Coligion Newly Registered

    Joined:
    Apr 22, 2013
    Messages:
    4
    Likes Received:
    0
    Could it not be possible to have an option that would tell the Framemeister to display games that switch from 240p to 480i to just stay in 240p mode? Not really sure if that is possible or would work appropriately, but was just a thought.


    Good luck with the RGB mod. I believe my N64 board revision is ill-suited for the RGB mod, so I was kinda hoping the Framemeister might still offer improvements via s-video. Is the N64 just an overall tough system to get looking decent on a modern TV?
     
    Last edited: Oct 7, 2013
    Coligion, Oct 7, 2013
    #250
  11. Yakumo

    Yakumo Moderator Staff Member

    Joined:
    Mar 14, 2004
    Messages:
    20,147
    Likes Received:
    338
    I don't think so because it's not the output that causes the issue. I run my Framemeister in 720p (looks best for scanlines) and it will stay in that mode no matter what the input resolution is. The problem comes with the upscan unit reading the input resolution then re-encoding it to the output resolution fast enough. I'm not tech master but I guess it would be possible to do instant resolution switches but you'd probably need hardware that is going to cost a hell of a lot more.

    With most games the switch in resolution isn't so bad (not that many games do it anyway) with only having to wait a second but I did find that the 2 player mode on Sonic 2 for the Mega Drive just doesn't work. The Framemeister just goes ape shit when trying to display the odd Mega Drive resolution. It could be due to the way the Mega Drive interlaces the image to achieve the high resolution effect.

    All high resolution SFC / SNES games work just fine as just high resolution Saturn games. Only Sonic 2's 2 player mode causes issues I've found. Actually, isn't that the only game on the Mega Drive to display a high resolution image?
     
    Yakumo, Oct 7, 2013
    #251
  12. Rabid Peanut-Butter

    Rabid Peanut-Butter <B>Site Supporter 2013</B><BR><B>Site Supporter 20

    Joined:
    Nov 20, 2004
    Messages:
    557
    Likes Received:
    0
    Wow bulk options. Wish I knew that many people into this kind of thing.

    I haven't been following the firmware, what's new to 1.8?
     
    Rabid Peanut-Butter, Oct 7, 2013
    #252
  13. Yakumo

    Yakumo Moderator Staff Member

    Joined:
    Mar 14, 2004
    Messages:
    20,147
    Likes Received:
    338
    Yep, if anyone can find 8 people you could sell them the Framemeister and keep one for yourself for free!

    The changes between 1.7a (what mine is) and 1.8 (the versions I sell) are as follows.

    Display shift to the right.

    and that's it! I have no idea what issue that fixes since my 1.7a firmware has no display issue that I can see. The update from 1.6 to 1.7 is massive though.
     
    Yakumo, Oct 8, 2013
    #253
  14. Rabid Peanut-Butter

    Rabid Peanut-Butter <B>Site Supporter 2013</B><BR><B>Site Supporter 20

    Joined:
    Nov 20, 2004
    Messages:
    557
    Likes Received:
    0
    Ha, well, thanks for the info. I won't worry about this update then.
     
    Rabid Peanut-Butter, Oct 8, 2013
    #254
  15. Daytime Dreamer

    Daytime Dreamer Spirited Member

    Joined:
    Feb 21, 2010
    Messages:
    158
    Likes Received:
    1
    Will place an order on one of those shortly. Waiting for this month to end so I can get paid :p
     
    Daytime Dreamer, Oct 15, 2013
    #255
  16. Yakumo

    Yakumo Moderator Staff Member

    Joined:
    Mar 14, 2004
    Messages:
    20,147
    Likes Received:
    338
    No problem. When you are ready to place an order please send me a PM and I'll forward you the payment details.

    Thanks!
     
    Yakumo, Oct 15, 2013
    #256
  17. Fabrizo

    Fabrizo Resolute Member

    Joined:
    Mar 14, 2004
    Messages:
    933
    Likes Received:
    0
    How would you get component input to work on this? I've been thinking out getting something more high end like this for use with my PSP, but it only outputs video when in game via component.
     
    Fabrizo, Oct 28, 2013
    #257
  18. Yakumo

    Yakumo Moderator Staff Member

    Joined:
    Mar 14, 2004
    Messages:
    20,147
    Likes Received:
    338
    That is easy. You would use a component to d–terminal cable. I sell them with the Framemeister for 1000yen. So a framemeister with the component to d–terminal cable would cost 39800 yen with EMS shipping included.
     
    Yakumo, Oct 29, 2013
    #258
  19. Fabrizo

    Fabrizo Resolute Member

    Joined:
    Mar 14, 2004
    Messages:
    933
    Likes Received:
    0
    By chance do you sell an adapter for using VGA input on it as well (for Dreamcast)?
     
    Fabrizo, Oct 29, 2013
    #259
  20. Yakumo

    Yakumo Moderator Staff Member

    Joined:
    Mar 14, 2004
    Messages:
    20,147
    Likes Received:
    338
    You can't actually buy a VGA to D-Terminal cable but there are VGA to HDMI boxes however these are not cheap at around 7000 yen. I just use a normal 21pin RGB cabble with my Dreamcast via the Framemeister. If you really want to use the Dreamcast's VGA then maybe ypu'd be better with the XRGB3 (I sell them too, same price as the Framemeister). The only problem with the XRGB3 is that it can only do scanlines over VGA.
     
    Yakumo, Oct 30, 2013
    #260
Page 13 of 39

Share This Page