Ah, this is what you meant. It's a problem with the translation patch ;p @Pikmin One console has a S-CIC fitted, the other I think I just cleverly...
No problem with this game. It works fine on a first revision SFC and several PAL SNES, including 1Chip revisions. (The 1Chip had a SuperCIC mod.)
While a true 1A would certainly be enough for the converter (it's more or less a pass through device), I'd still try a different power adapter....
Oh, sorry for digging up an old thread. I didn't notice. It's still valid though, as the easy method is really hard to find. (Even if it doesn't...
This is the simplest circuit to build. It works well on my Trinitron TV. Obviously you won't be feeding this into an upscaler or any other modern...
On this forum even ;p Anyway, the mod works but it causes new problems that are worse to look at. For now it looks like the best way to mod a 3...
Luckily not a PAL console. Those carry 12v on one pin. That would be bad :p
Oh, alright. Don't worry too much about the shield. It means ground as well. Well, now I'm out of ideas. It's good that your setup works with...
The pcb looks horrible but could still work. You need a multi meter to test it (check for continuity across the traces). In any case, this pcb is...
Check your cable against the NTSC SNES cable schematic: http://members.optusnet.com.au/eviltim/gamescart/gamescart.htm#snes
It's a prime example of leaked caps. You will need to replace all 3 caps and repair the pcb damage with some wires.
Yes, run SNES csync though the sync stripper. It will act as a buffer to 5V TTL and otherwise work the same as with a composite source. It just...
Does the SNES still work if you pass it through your 680 Ohm modded sync stripper? If it does, the sync stripper works well and your problem is...
It sounds like you're good with the 680 Ohm and your problem is now with the Framemeister alone. Have you tried tuning the sync level and could...
In series means inbetween, not to ground. It can either be "in series" or "to ground" ;)
Do you have a 680 Ohm resistor in series with the sync stripper output? It outputs full TTL level sync and many devices can't work with that. The...
All Wii are the same. The video encoder has its features changed by the region bit on the console. There's even a homebrew hack that changes that...
CPU for 3 chip SNES can be either the original S-CPU or the 2nd revision S-CPU B. They should be interchangeable but I only read that, never...
You can always use an adapter that has a higher Amps rating than what your device requires. So yea, you'll be fine.
Bootleg cart from 1992.
Separate names with a comma.
