Indeed you would need to synchronize game-state between two(+) systems, in real-time. IIRC the controller port is polled every frame/vblank thus...
Or you could just use ucon64...
The GBS Is picky about certain refresh frequencies; e.g. Arcade style ones its very twitchy with (e.g. anything not 15Khz or 31Khz - 30/29/24Khz...
Actually; keeping an IDE window, the documentation/API, and/or debugger - on multiple screens is great for productivity. May not help much for...
Why engineer a proper clock generator PLL ? and make it dynamically clockable in real time ? Toggle a button for boost/normal, and allow in-game...
Very Nice!
^ Left out some steps - (check pin polarity, blah blah blah, replace SRAM battery... tune Flux Capacitor) Also, are there ANY actual GAMES not...
If such a rarity were to fall into my unlucky hands; Put on ESD strap, put console on anti-static mat. I'd have the gamebit / custom-sony-screw's...
Several of the 'Fake' USB Flash drives were actually custom "loop drives" which have the drives own MCU modify the FAT filesystem to make the...
Not enough RAM for a buffer ? Bwahah DRAM is cheap! use FIFO DRAM, 8 bits in, the frame (or a hefty chunk of it) and re-read it out when the...
Yeah - can someone bother making a thread for EACH device; and then only talk about that specific ONE device is each separate thread?
You mean a USB Hub? Well the controller is already acting as a host so in theory, yes - but it will need actual ZIP drive drivers. (Seriously ZIP...
Remember: Filesystems only matter to the software READING it. (GE-EMU, now in ???? ### Flavours?!?) SD, SDHC, SDXC, -- Are ALL different...
IIRC - the DC Modem (ah Trick question there were ~3 different models!); the G2 Bus was used to directly feed it data (no DMA?) and directly...
Good to see this Project Alive and Well! The 'mini' board has support for OTG ? * Host (for reading USB flash drives - So you'd need a partial...
You'd probably be able to pull z9 processors from scrapped or off-lease systems. If you can find one...
Solder Suckers usually suck. (Handy for too MUCH solder - but usually pretty useless) Flux & Copper Braid with some fresh rosin core solder if...
The FPGA designs have the highest chance of working - (nee also highest COST). On another topic: this G1 Bus, it also has the system boot EEPROM...
Can I suggest a 90-Degree rotated IDE Header, If the IDE header is at the edge of the bridge PCB - then any 3rd party IDE-TO-SATA adapter board...
the SPI bus can support multiple devices with Chip Selects... Hack together a combined SPI & SD Card combo adaptor - with an AVR in the middle as...
Separate names with a comma.
