Forgot to mention that I also have a sync stripper (LM1881) on the sync signal (in the Scart adapter) and it is almost always on. I remember I had...
I may have spoke too soon:...
I replied on the XRGBMini thread already. Keep in mind my experiment with PAL60 where with a modded PAL SMS 2, it should largely be the same as...
It is a LoRes/HiRes switch based issue. Regarding 50/60Hz if you use RGB it doesn't matter as they both work fine if instead you plan to use...
Yes it does, I mean when the game switches from Hi-res to Lo-res and vice-versa there's a 5-7 sec gap due to the XRGBMini releasing the HDMI...
New XRGBMini firmware is available (ver 2.03a which is a quick fix on 2.03 of a week earlier). It seems they added a bunch of options to direct...
According to http://shmups.system11.org/viewtopic.php?p=1157722&sid=94a3ff3881bd71a3767214c9962cd6a3#p1157722 rough translation of what's new: -...
It's a sync stripper: http://www.ti.com/lit/ds/symlink/lm1881.pdf It is used to take a composite TV signal (PAL or NTSC) and throw away...
Someone over at sega-16 decided to add the lm-1881 directly inside the XRGB mini and took pictures of it....
And you mean that the Compare Files feature in the Analyze menu in HxD is not good enough for you?
http://assemblergames.com/l/threads/pce-tg16-hucard-everdrive.31764/page-14#post-586046
I personally noticed that since I inserted an LM1881 in the "composite" scart line to get it cleaned the sync issues are way reduced. I have no...
Are we done here? Did he go on vacation?
As I was at it I educated myself about matching etc ... http://www3.eng.cam.ac.uk/DesignOffice/mdp/electric_web/AC/AC_14.html I found interesting...
I completely missed that part of the posts. And it was right there in the OP, now I feel like an arse .... oh well, sorry!!!
I'm not 100% sure what that means. Take the SNES Mini PAL, in the Scart cable Nintendo added a 75 Ohm in parallel with the TV (from R-G-B to GND),...
The input dividers require 6 new resistors (2 for each input), the change I am proposing replaces the 3 75Ohm with say 90/100 Ohm and that's it,...
I did the mod without any divider at the input pins and using std 75Ohm resistors at the out, I have to say that connected to the XRGB Mini works...
More experiments to report. I bought a Scart->JP21 adapter a few weeks back to use with the Mini so I can just use normal Scart cables with it,...
I'm about to attempt the RetroRGB SNES mini mod with 7314. I understand it is not perfect, it seems all that is happening with the evolutions is...
Separate names with a comma.