None issue. Get a grip!
No you wont!
Gold badge = Tacky!
Need better pictures. It's basically a case of following the trace, scrape away solder mask and solder (that's solder with a VERY BIG L..soLder)...
Ram a screwdriver in that silver sticker and start unscrewing it VERY slowly. Video it and put it on YouTube for us all to see. Do a slow-mo of it...
He's right! It screamingly obvious what the issue is with that board. The wires a useless at best!
A powered D-Link USB 6 port hub. I use when I'm repairing batches of PS3 pads. Usually 50 pads at a time. So I need to have them fully charged and...
Fact of the matter is people handle these PCB's like a two year old would hold it's chocolate!
That's it WHAT EVER YOU DO DON'T hold the PCB by the edges, you have to make sure you get full finger contact over as many bear traces as...
I'm not, I'm amused more than anything. It's a PS1 with a bit of rust, toss it buy another or... Turn it in to a project an involve the world on...
IT'S A PS1 with a little bit of rust!! Not an AC Cobra restoration project! Dremmel it, Sand it, WD40 it, Etch primer it, Plate it in gold leaf,...
Make sure the caps are soldered in the correct polarity! NEVER underestimate how FU*&ing moronic people can be! Always do the non destructive...
Well you can swap GPU from different Xbox but no the CPU. Also while the console is in RROD state the CPU and GPU's are powered on. Try putting...
Well powering it on with out the heat sinks on you have just destroyed the CPU and or GPU!! Sorry but, Well done! That is now an "X" box! The...
It's had the lid off it but other than that it's a virgin.
I had a TV do this back in the 90's no degauss function so I used a magnet out of a speaker. Swept it over the screen starting from the centre...
1: Are you using the correct adapter? 2: Are you sure the caps you replaced are correct uf value and of same voltage or higher? 3: Are you sure...
Hi, I have the above PS2 slim in and the disk does not spin. The laser moves and the laser is working (red dot). I've removed the lid and...
Hi, Do you have any of these left I may want one or two?
I've seen those ribbon connectors before mostly in DVD players and printers. I'm sure Ebay will have a new one for a couple of £$£. If you...
Separate names with a comma.
