Off topic Marshallh but just wanted to say your skills with what you did on the HDMI and other stuff have been top notch. You're a clever chap....
With a hammer. That sucka deserved it. :cool:
Update - made the GameCube into a cartridge, wired up RGB to the HDMI 1080i upscaler gadget, and the system works perfectly, with WaveBird...
I never soldered anything until about 7 years ago. Soldering is simple, however you need to practice, when you get good at it, assuming you have a...
USB cables as you say don't have many wires in them and the wires tend to be less flexible too - which is relevant when relocating ports...
Perhaps the best way when selling items outside ebay, like modded items, etc is by bank transfer into a bank account rather than PayPal? Someone...
I used the wires from the parallel cable for relocating the GameCube drive unit to the motherboard, works absolutely fine. Going to use for my...
Indeed, me too however the wire still needs holding in place without moving while the wire is soldered to the joint - hence applying a little...
Also, you see many ROM discs, copy software, pirated gadgets that are rip-offs of real stuff, flashcards and similar on ebay every day - if they...
When they say "permanently limited" I presume you can remove your funds otherwise if they are preventing you from your money that is technically...
Ribbon cable is thinner than the stuff I use, also ribbon cable is easy for the wire inside the cable to snap if you strip them or pull too much...
The wires in parallel cables are thin, around 28awg however as good as any other thin wires. You get 25 wires in a parallel cable and the wires...
When I did the previous system, Project Unity, the internet news sites referred to me as "evil genius/mad scientist/hardware hacker Bacteria",...
Reason to bump the old thread is to say i've just installed Windows 10 Professional OS on my three Intel NUC computers, everything worked...
Taking my time with the GameCube. In process of relocating the drive port connections and on the motherboard. Removed the ports themselves, worked...
Thought I would upload this as I have been asked at least 50 times in the past on my old forum, present site and previous ones "what wires do I...
I'm not going to say it was a benefit the old board died and forced me to re-do from scratch, however as a consequence of having to start again, I...
Tested on the new motherboard and didn't make any difference which way round the leads of the multimeter were, same findings. Did same test with...
I'll try that - does it matter which way round multimeter leads are connected to a circuit when testing for continuity? I'll do the same thing,...
Discovered something interesting and unusual. I connected the regulator board from the GC to the GC motherboard (the new ones); nothing else....
Separate names with a comma.