yes, and DONT PLUG A JP21 INTO A SCART PORT it can totally fuck shit up in a bad way. vise versa for scart into jp21. re-wire first, then test it.
XRGB mini is notorious for not liking signals from the genesis. might be a sync issue.
dude then thats your problem...... you NEED 5V. check the power rail again while on and verify the PSU has 5 volts on the 2nd pin
Impressive! when i finish my bios install in my Va0 im def gonna test this out!
thats repairable, not really that bad. get some caps solder bridge the board, and your good to go. and don't be surprised, sometimes its just from...
also move the point on the chip to the other side too, odly enough i had to move it twice before it worked lol.
austin move the 5V line to the alternate point to see if that gets it working, and get a thicker cable for christ sakes!!!!!!
http://www.romhacking.net/forum/index.php?topic=5831.0 have you tried checking out this translation to see if there's options for it? seems its...
Austin, you need another chip meng. I could jump that pretty easily. But you need skills, Ad is right
Austin , you lifted the middle jumper, that's why it doesn't work. The middle jumper needs to be connected to the JVC pad, and there's no pad left...
really? i swapped a 162 into mine and it worked, had 220 originally, does it have to do with the 220 having the proper ribbon and the 162 doesn't?...
exatamente, Isso não brega :)
MNK, i couldn't find anybody with new KSS-220's or 160's. i had to buy an old ten dollar discman on ebay to get a perfect one. so that may be the...
y/c is S-video, VTR is an Old SChool input for old vcrs and tape decks. i have adapters here at work that turn that y/c plub into either two...
Dev, did you ask Kev if he had any? I'm pretty sure he has Tools.
RaZiel, in Japan, the official name CDrom2, actually is read as CD Rom Rom. So thats why i now call it Rom Rom :) i just learned that like 2 weeks...
whats going to hurt your pockets is an Arcade Card Pro. I got lucky and got mine back in a trade with Goodtofufriday. i traded a Ricoh short throw...
someguy1, dude piece one together. i finished my Rom Rom 100% yesterday, cost me about 160 including shipping, terminating a turbo pad with an 8...
Saru, you got it! Give that a try. If graphics are still corrupted l, could be vram or worse, that link provides some good ideas on where to go...
Scrape the green coating from the board and solder a jumper to the leg from the remaining trace, should be fine after that.
Separate names with a comma.