No worries! Keep the R6, 7, and 8. Wire up 3 1.2k resistors (Digikey does not have 1.2k 1% tolerance, but Mouser does - Link) from the vias to...
The 3 wire mod is wrong. The other mod you have on your page is the right one. The correction to the circuit needs to be done before the RGB chip.
If you don't have a solder sucker, get one of those desoldering irons with the bulb from Radio Shack or online. They work great for taking out...
The THS7374 is slightly different than the THS7314 used in RetroRGB amp. The only difference would be the extra input to buffer the CSYNC signal....
I was looking up stuff for my NES Everdrive and I found a pretty neat page showing a bunch of different modifications:...
For the 2 posts who are having interference, how well made is your RGB cable? It is important that the cable is shielded, the shield is connected...
Impedance mismatching can cause ringing and ghosting on the video image. But, hey if it's acceptable to you, by all means go ahead. I don't see...
Oh ok. Well, good luck then. We were just looking for the proper design, and it was important to keep the output with a 75 ohm resistor since...
I understand what you are saying, but if you plan on adding resistors to make a divider on the output, why not add the proper resistors to fix the...
You would have an impedance mismatch. Keep the output at 75 ohms, read the thread, and add the resistors to the proper points on the mini.
Here's the snippet from Volume 25 of Nintendo Power (June 1991 - Battletoads Cover). On a side note, EmuParadise has plenty of retro mags...
I believe in the documents somewhere, there would also be a cable coming from the cartridge to the rear of the CD unit as well.
For some reason, I'm thinking vol 27 (MM: Dr Wily's Revenge cover). I'll have to check into it tomorrow. That was Aug 1991. EDIT: I found this...
I have the Nintendo Power where they talked about the cd rom technology. I have to dig it up. I feel like it was different than the screenshot...
Earthbound was released on the Virtual Console a year or so ago, and the prices for the cartridge are still high. I think most video game...
Yeah obviously PCs could do that, just thought it was a little difficult with the type of sound channels you had to work with on a console.
One thing that stands out to me was in the beginning of EA Sports games for SNES where it goes "E...A...Sports...its in the game". Not sure how...
I have a feeling they will charge absurd prices, higher than eBay. They will say "we have a guarantee that these games/consoles work so we can...
Ahh good point. I should have used 0.714V in the calculation instead of 0.7V. I think the 150 ohm resistors are actually 1% tolerance. The...
Yes, this was stated in post # 35:
Separate names with a comma.