It depends. Bootable carts' firmware is copied off cart to system RAM by BIOS. But BIOS checks if card is bootable only right after reset, so if...
Congratulations, Doc!
Good job! It seems i should return to active parser development soon. Maybe they simply used some of the BIOS subroutines? ^_^ Theoretically it...
Okay, now repo contains a fixed code (still untested though). But actually i cheated a bit. I decompress a full image, and then repack cluster...
They're both currently in progress. They both require some hardware debugging (new boards have some hardware issues), but i'm busy with my main...
Please do not try to port currently commited code, it still have some unfixed bugs. Compression is simple RLE. At 0x20000 there is a magic...
Done. The support is still buggy (it works only if you choose 64-byte custer), and untested, but at least it works. If you're interested, look at...
I don't know the exact format, but i will try to reverse it. Things I already found are: Bootcode and cheats are in the first half of the...
Battery is connected to SRAM power (called SVCC on a VA13 schematic available on this forum) via double diode (D2 on page 8), to prevent battery...
Yes, ROM and RAM are not compatible and probably they don't even intersects in address space, so there is no way to emulate ROM with RAM, even...
Great, that is much more helpful than static pics. Some things you're talking about are already fixed at github (USB hole increased, side support...
SaturnAR, thanks for the feedback! I will see what can be done to fix these problems.
From all my short and unfruitful gamedev expierence i only was meeting a reverse situation: there are coders, but there is no way to get/make...
I don't know the exact prices, but i don't expect them to be lower than homebrew printing. And any order processing would be definitely slower...
Raft was useless on a big on-paper print, i checked it before. I just got a lomond self-adhesive paper, works good on small parts, i will try with...
Well, it wasn't that bright on my side, first test ended up being a total loss. First of all, i used a paper tape as adhesive, and it seems it...
Nice shots! You can try to decrease a layer height to 0.1 or 0.15 mm, and decrease a feed rate a little. That should probably give better quality,...
Thanks, and congratulations on being the first beta-tester ever ^_^ You beat me there, my printer have gone up&running just this weekend, but i...
CUE/BIN does not necessarily include subchannel data, so should conversion tool fake it if it's missing? Other than this, CDI is closed, and while...
It will replace RAM and/or flash carts, with or without Rhea. Playing games from SD card is possible, but won't be supported soon (and it might...
Separate names with a comma.
