I can't speak to the Bandridge specifically, but I was able to successfully daisy chain a Hama (unpowered) switch as well as a Shinybow (powered)...
If you really want to, I had no visible loss of quality in splitting the SCART signal through a Shinybow splitter/distributor box. But that was...
If you're only hearing it on that one system, it is probably an issue with the cable itself rather than the switch, but be aware that the switch...
Not trying to sound dense here, but it depends on what you mean by composite, and I'm jumping from Wikipedia to the pinout link I posted earlier....
You mean pin 16, right?
Crud. I was hoping you were using pin 8 as the "is this port active?" And that it was interfering with the blanking. Given the smearing I showed...
OK, so if I'm reading the pinouts correctly (according to here), it looks like someone added a resistor between blanking (pin 16) and +12...
Thank you, I really appreciate the help from both of you! As I don't have access to an oscilloscope at this time, I'm going to take aim at a new...
Both. Only when run through the new switch.
Yes, I knew I had seen that specific chip on your site. Thank you sir. Like I said, I have a toggle on the console to go between csync and comp...
The amp came from here: http://www.otakus-store.net/en/home/11-rgb-nec-modding-kit-for-pc-engine.html Following the instructions here:...
That's fair enough. I installed the same amp that @retrorgb recommends on his site, so I'm curious as to which other methods I could use to boost...
I'd be happy to send mine over to you for testing. What I'm curious about is why the signal was strong enough in the old setup (which had a...
Yes. The capture device was just a more reliable source to grab an image from. Same on the PVM. Yes. It does not affect my Saturn, Genesis, or...
@superg , I'm running into an issue that I'm not sure how to solve. With my old setup, I have my PC-Engine getting split between a PVM and going...
I appreciate the VGA out as it eliminates the need for an XSYNC box in my setup before going into an XCAPTURE.
Just got mine last night but haven't hooked it up yet. A couple of questions, which maybe @retrorgb could use to start building a FAQ? 1....
If this online manual is to be believed ( http://www.manualslib.com/manual/1007621/Sony-Trinitron-Pvm-2130qm.html?page=2#manual ), it looks like...
I'm currently using an XSYNC-1 box to split SCART up into VGA + L/R audio. I am hoping that your switch will eliminate the need for that; is that...
Oh, I was assuming you'd get a CRT that took BNC, such as a Sony BVM/PVM.
Separate names with a comma.