Alright we have red light and it still will not read nor fire up the cd motor. The laser has to read media being in the drive before the spindle...
Yes...just found a laser pinout for 3d0....in russian....working off this now
I adapted the power connector to use the old one so we have power, the laser moves, and the sled sorta moves but there is no red light coming from...
It runs Navi properly so I am guessing the pcmica must be ok. Have not tried the new laser to read the discs. It is curious why the install fails...
There is a 400c in the 10k and the new laser i got is a 400c. Since the .30 and .20 installs fail at nearly the same point I doubt it is the laser...
I dunno it can read dvd9 even, I did just get a new laser for my 30001r so I might pop it in the 10k and see.
I actually already had an internal drive for the 37000 for years that worked it is the one with the extra content. All of the Navi discs are...
I formated the maxtor in ule but the seagate did not give me the option and this was only on the 10k. I have not run ule on the 37000. I guess if...
And I have just installed .30 navi on my 37000 ps2 with the seagate drive that fails completely on the 10k, can't even format it in ule. Now what?...
Gonna slam the hdds in my 37000 and see if they will play nice when I get home tonight. That should pretty much answer our questions. Post that...
All of the 10k series need a card.
well I do have a working maxtor drive in my 37000
Gimme a little time to hunt down the maxtor and seagate stuff and jam these in my desktop.
No we still have no indication that there is anything actually wrong with the drives. It is just a theory.
Hdd 2 the one that will not format in ule.
Hdd 1 the one i can format.
I have one seagate and one maxtor which is the one i can atleast format in ule. So how do I work this pc3000?
The one that is like my internal is formatted from ule. The second one won't format at all not even in ule. Navi .30 disc that will install to...
Might have found it here, cracked one of the externals open, My retail internal in my 370000 OB is set to cable select ( think) My maxtor...
Ok I got the two screws. Where would I be sending them? Also how did you get the power ribbon to work on the laser?
Separate names with a comma.
