GCVideo-Lite, the very first version I released that only outputs analog video and SPDIF audio, can be set to output either RGB or YPbPr (*) with...
Yes But is your HD tv lag-less with 480p input signals over HDMI?
No. The Wii's encoder chip handles both audio and video and has some configuration registers that can be set from the Wii's CPU - I don't know...
"Threshold voltage" in the data sheet snippet seems to suggest to me that the pins may be digital inputs instead of analog - this would allow only...
Another candidate signal would be the one that turns the laser diode on, it's called LD_ON or LDON in the schematics in the service manual. It...
You mean this? [IMG] Which was barely good enough to capture this? [img] If you look closely, you can see that the resolution popup was...
There are special low-temperature solder alloys on the market that are primarily meant for desoldering - you flood the pins with the alloy at your...
There are some ICs available that try to figure out automatically which charger variant the device connected to the USB port wants to see to...
Make sure to add suitable, separate fuses (2.5A, less for lower-current outputs) for each output, otherwise a short on one of the outputs may not...
How much dissipated power (in mW) would you consider problematic? Switching regulators are not 100% efficient and to a first-order approximation...
The FPGA is RAM-based (like most current FPGAs on the market), it automatically loads its configuration from the external flash on powerup.
Ok, but that still doesn't explain the need for a sync stripper. Unlike some other scalers, the XRGB Mini does not require "clean" sync.
Why do you think you would need a sync stripper for the XRGB Mini?
Because I didn't bother to scroll up far enough and forgot about your month-old post already, sorry!
There is also an english-language thread about it on the NFGgames forums: http://nfggames.com/forum2/index.php?topic=5744.0 Works great in my...
Separate names with a comma.
